Reflections on the networking industry, part 2: On CLI, APIs and SNMP

In the previous post I briefly described the fact that many networks today are closed and vertically designed. While standard protocols are being adopted by vendors, true interoperability is still a challenge. Sure, you can bring up a BGP peer between platforms from different vendors and exchange route information (otherwise we couldn’t scale the Internet), but management and configuration is still, in most cases, vendor specific.

Every network engineer out there got to respect the CLI. We sometimes love them and sometimes hate them, but we all tend to master them. The glorious way of interacting with a network device, even in 2015. Some common properties of CLIs are –

  1. They are vendor, and sometimes even device, specific;
  2. They are not standardized; there is no standard for setting up the data or for displaying the text
  3. They don’t have a strict notion of versioning or guarantee backward compatibility;
  4. They can change between software releases;

All of the above make CLIs an acceptable solution up to a certain scale. With large-scale networks automation is a key part and usually mandatory. But giving the properties mentioned above, automating a network device configuration based on CLI commands isn’t a trivial task.

Today, you can see more and more vendors that support other protocols such as NETCONF or REST for interacting with their devices. The impression is that you suddenly have a proper API and a standard method to communicate with the devices. Reality is that with such protocols you do have a standard transport to interact with a device, but you still do not have an API, with each device/vendor still represents data differently as brilliantly described by Jason Edelman in this blog post.

We, as an industry, must agree on a standard way for representing the network data. No more vendor-specific implementations, but true, open, models. The last major try was with SNMP, the Simple Network Management Protocol, which is anything but simple. Most people just turn it off, or use it to capture (read: poll) very basic information from a device. Anything more complex than that, not to mention device configuration, requires installation of vendor specific MIBs – and we are back to the same problem.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s